Electronic Analytical Balance: The purpose of the instruments cabinet or the wind screen is to enclose completely the scale and the substance being measured in an area with no draft. This increases the accuracy of the measurement because airflow is not a factor.
Features:

Ultra slim design

Equipped with a high precise loadcell sensor system
Max: Capacity:110g

Min capacity: 0.006g

Accuracy: ±0.005g

Sensor: Loadcell HBM
Division: 1mg

displayed by LED

Working temperature: 17.0℃～25.5℃

Weighing Counting and tareing function

PACKING SIZE(mm)

Inside:415×285×430 Outside:475×315×485

Weight:7.5Kg

China wholesaler, exporter, supplier. 

Before weighing anything on the analytical balance you must make sure that it is leveled and zeroed.

To check the leveling on the balance, look at the leveling bubble on the floor of the weighing chamber. If it is not centered, center it by turning the leveling screws on the bottom toward the back of the balance.

Once the balance is leveled, close all the chamber doors and press the control bar on the front of the balance. After a few seconds, a row of zeros will appear. This indicates that the balance is zeroed and ready for use.

Weighing a liquid, powder, or granular substance

These substances must always be weighed using an appropriate weighing container.

• Place the weighing container on the balance pan and close the doors. 
  
  

• Tare the container by briefly pressing the control bar. The readout will read zero with the container sitting on the pan. This allows the mass of your sample to be read directly. 
  
  

• Add the substance to be weighed. Be careful not to spill chemicals on the balance. If need be, you can remove the container from the weighing chamber while you add the sample provided that noone presses the control bar before you weigh your sample. 
  
  

• With the sample and its container sitting on the pan, close the chamber doors and read the display to find the mass of your sample.